This Floating Wardrobe Creates a Custom, Litter-Free Entryway


As somebody who lives in a small dwelling, I’m at all times in search of methods to make issues extra useful with out overwhelming a room. One trick I like is holding issues off the ground to create extra visible house. (Plus, it makes it simpler to hoover.)

Turns out, IKEA hacker Alex Semenov (Homeject) had comparable ideas about his entryway. He wanted a spot to hold coats that didn’t really feel miles away from the entrance door and made it simple for his robotic vacuum to do its factor.

His answer began with a tried-and-true IKEA favourite, the PAX wardrobe. But he determined to elevate it off the ground and make a couple of modifications, creating a custom closet that appears prefer it value a reasonably penny.

Photo Credit: Alex Semenov | Homeject

What You’ll Need

  • PAX wall-mounted storage body, white, 19⅝×13¾×79⅛”
  • SEKTION suspension rail, 84″ (reduce into two)
  • PAX wall-mount brackets (#124518 + #124516)
  • FORSAND door, white
  • KOMPLEMENT push opener
  • KOMPLEMENT pull-out tray
  • KOMPLEMENT shoe shelf ×3
  • FÖRBÄTTRA cowl panels, high-gloss white (elective) (Alex discovered them within the As-Is part)
  • ÖVERSIDAN LED strip (elective)
  • Pull-down closet rod (21–26″, reduce to suit)
  • Hook bar
  • Gold and white wall hooks
  • Screws
  • Stud finder
  • Level
  • Utility knife
  • Hand noticed
  • Basics: drill, screwdriver, tape measure, pencil

How to Create a Custom Entryway Closet That Looks Pricey

1. Start With the Studs

Anytime you propose to hold one thing on the wall, consider help, help, help! First issues first, find the wall studs and mark them so you recognize precisely the place to place the mounting screws.

2. Assemble and Hang the PAX

Photo Credit: Alex Semenov | Homeject

Put collectively the PAX wardrobe body in keeping with IKEA’s directions. Screw the highest SEKTION rail into the studs, grasp the PAX, and mark the place the underside rail must go. Remove the body, screw the underside rail into the studs, then rehang the body.

Photo Credit: Alex Semenov | Homeject

3. Time to Go Custom and Make It Float

Cut off the bottom panels beneath the underside shelf, and trim roughly 2 inches off the underside to get the floating look. Attach the FÖRBÄTTRA cowl panels, in the event you opted to get them, to the body sides, permitting them to increase barely past the entrance edge. Install the push opener and the FORSAND door.

4. Add Accessories and Fittings

Photo Credit: Alex Semenov | Homeject

Cut the rod to dimension, and mount it.The pull-down closet rod is an excellent sensible addition. It makes it a breeze to achieve coats and jackets while not having a stool.

Photo Credit: Alex Semenov | Homeject

Next, add hooks, set up the KOMPLEMENT pull-out tray and shoe cabinets, and mount wall hooks on the skin of the body for further coat storage, purses, or hats. Lastly, in the event you determine to go together with the ÖVERSIDAN LED, or one thing comparable, place it contained in the body.

Check out extra particulars and the way Alex created this custom entryway PAX closet.

Good To Know

How lengthy did this hack take? About 5 to 6 hours.

How a lot did this hack value? Alex spent about $400 on the hack, however take into accout the FÖRBÄTTRA panels and LED lighting are elective. Plus, although the panels usually value about $121 apiece, Alex lucked out and located his within the As-Is Section.

You might at all times scope out on-line marketplaces, like Facebook Marketplace, to see if anybody is promoting any items. It’s a good way to chop prices and maximize your hacking {dollars}. I look there lots after I’m looking for sure IKEA objects since my closest IKEA is six hours away (sigh). But there are at all times a ton of prospects.

What was the toughest half about this hack?

According to Alex, the trickiest half was getting the underside rail in the appropriate spot. Definitely grasp the body first to mark the correct location, fairly than making an attempt to measure and grasp the rail first.

Going Custom for Less

Photo Credit: Alex Semenov | Homeject

What do you consider this floating storage solution? Personally, I like the way it retains the world beneath free and clear. It actually does make the house really feel extra open, and at a fraction of the price of a customized built-in unit.

Photo Credit: Alex Semenov | Homeject

Would this be one thing you’d strive? Or perhaps you could have a unique venture that’s helped you resolve a dilemma in your personal dwelling? We’d like to see it, so make certain to share your hack for an opportunity to indicate it off on the location!



Source link