My Bluetooth headphones sounded unusually quiet till I modified this Android setting

Are your Bluetooth headphones sounding unusually quiet with none obvious purpose? Before you resolve that the unit you acquired could also be defective, or the mannequin has not been tuned effectively, be sure that to take a look at just a few key settings in your Android system.

I used to be just lately going through the same subject. To repair it, I needed to entry an choice that’s normally hidden by default and must be unlocked manually.

Unlock Developer choices to entry hidden settings

Developer choices will present up underneath System choices

By default, Developer Options are usually not seen on most Android handsets. When enabled, you get entry to a number of extra settings which might probably repair the sound high quality of your Bluetooth system.

1. Open the Settings app.
2. Navigate to the About Phone part.
3. Search for the Build quantity or Software info.
4. Tap Build quantity seven consecutive instances.

Enter your password if prompted. After affirmation, you must get a notification confirming Developer Options might be accessed. These choices can normally be discovered underneath System or an equal part.

Absolute quantity syncs audio between units

It may cause quantity points in some circumstances

The setting that fastened the difficulty for me was disabling absolute quantity. Android normally syncs the cellphone’s media quantity with the quantity of the related wi-fi headphones.

What this basically means is that your Android system and Bluetooth headphones share the identical quantity degree. Whether you enhance or lower the quantity utilizing your cellphone or the headphones’ controls, the change is mirrored on each units.

There is not any denying the fact that this can be a convenient solution. But the way in which the system finally behaves can range relying on the units, Android model, Bluetooth compatibility, and the precise headphones you are utilizing.

At instances, your cellphone could have completely different quantity steps compared to the headphones, which might trigger some points when the degrees do not match completely.

Your Bluetooth headphones might sound quieter as a result of Android thinks they’ve already reached most quantity, regardless that the headphones should have extra quantity headroom.

Thankfully, Android means that you can separate the 2 quantity controls by following just a few easy steps.

1. Open the Settings app in your system.
2. Tap on System or an equal choice.
3. Navigate and faucet on Developer choices.
4. Navigate to the Networking part.
5. Look for the Disable absolute quantity choice.
6. Tap the toggle subsequent to it to show it on.

After disabling Absolute quantity, restart your Bluetooth headphones and reconnect them to your cellphone. You ought to then be capable of preserve separate quantity ranges to your cellphone and Bluetooth headphones.

For me, the distinction was fairly noticeable, and I managed to revive the quantity of the headphones again to its peak.

Use the best high quality codec accessible to your connection

Other vital settings to examine

In case disabling absolutely the quantity characteristic doesn’t be just right for you, there are different choices you’ll be able to take a look at. The Bluetooth Audio Codec is one such vital setting, as codecs are accountable for how audio is encoded and decoded.

Depending on the make of your Android system and headphones, you may even see choices corresponding to SBC, AAC, aptX, or LDAC. Your system ought to usually choose a suitable codec robotically, however you’ll be able to examine what’s getting used underneath Developer choices > Bluetooth Audio Codec. Choose the best high quality codec accessible to your connection.

Another choice to take a look at is the Bluetooth A2DP {hardware} offload. When enabled, your cellphone handles Bluetooth audio processing duties through a separate chipset as a substitute of your cellphone’s predominant SoC.

While this will save battery life, it may well additionally trigger your system’s audio high quality to be muddy. So attempt disabling this characteristic by going to Settings > System > Developer choices > Disable Bluetooth A2DP {hardware} offload, then flip the toggle on and restart your cellphone.

You also can select the variety of Bluetooth units that may connect with your smartphone without delay. You can scale back the worth in the event you really feel your smartphone finally ends up connecting to an unintended system. Under developer choices, it’s also possible to choose the pattern price and select between mono and stereo channels as per your preferences.

Developer choices are residence to technical settings, so solely change them while you’re positive of what you are doing. Otherwise, you may find yourself breaking one thing you did not imply to.

Cross-check the whole lot earlier than blaming your Bluetooth headphones

Compared to wired headphones which might be plug-and-play, Bluetooth units have a lot of elements that may end up affecting the audio quality. Disabling the Absolute Volume choice fastened the difficulty for me.

Be positive to tweak the completely different settings one after the other. Chances are you must be capable of repair the difficulty. Another choice to attempt is connecting your headphones to a distinct cellphone or pill. If it really works effectively, it means the difficulty is restricted to your smartphone.