Got Slanted Ceilings? This Clever IKEA Storage Hack Unlocks Wasted Space

Ooh, those peskysloped ceilings They sure do make it challenging to fit storage, do not they? But when you’re a creative IKEA hacker like Marie, you satisfy the difficulty head-on and wind up with a sweet, custom-built-in service.

If you’re handling a pitched roof and attempting to find out your storage alternatives, then you require to take a look at this hack. The IKEA METOD kitchen area cabinets formed the structure of 2 banks of built-ins for a restroom and a visitor space, both with sloped ceilings. (The SEKTION will work similarly well for this hack.)

You’ll require a couple of tools beyond the fundamental drill and screw weapon for this one, together with some helpful abilities to choose them. However, if you’re up for the difficulty, Marie believes the endgame deserves the effort. So keep checking out to see how to recreate these streamlined cabinets, and conquer your sloping ceiling.

What You’ll Need

• IKEA METOD cabinets (37 cm depth, 80 cm height); the number of depends upon your particular area
• IKEA VOXTORP doors (your favored style), nevertheless numerous you require based upon your style layout and the size that matches your frames
• 1 IKEA VOXTORP door (100 cm) for the exposed side of the ended up system– if you have more than one exposed side, get another door, and so on
• IKEA MAXIMERA drawers (Marie utilized mid-sized for leading drawers and high drawers for the bottom– make certain to buy the sizes that match your cabinet frames); the number of you require just depends upon the number of cabinet frames you prepare to utilize drawers in
• IKEA VOXTORP drawer fronts (to match doors), one for each drawer
• IKEA FÖRBÄTTRA cover panels (matching style to doors for a structured appearance)
• Oak wood panel (for the tops)
• LED light strips
• Aluminum profile
• 5cm metal legs (if you wish to utilize legs)
• Plunge circular saw
• Router
• Silicone
• Hammer
• Drill motorist
• Wood stain, oil, varnish (your option)
• Basics– screw weapon, measuring tape, pencil, drill

Creating Custom Cabinets for Sloped Ceilings

1. Measure the Slope and Take Notes

The entire factor for this hack is an angled ceiling, so you require to begin there. Measure the slope, take cautious notes, procedure once again, and double-check.

Measure the angle and the height of the wall at the point where the angle starts. Also, make notes of how far out your cabinets will extend from the wall and where the fronts will line up in relation to the ceiling.

You wish to get your measurements fix before you begin making any cuts (Or purchases). It may assist to sketch things out, utilize style preparation software application, or attempt an app to check your measurements.

2. Get Ready to Cut the Cabinets

Before you reduced the cabinets, choose whether you prepare to utilize any legs beneath them. If so, you likewise require to understand the precise height of the legs you prepare to utilize. This number will impact the general height of your cabinets and how they associate the wall and ceiling.

Make any required changes to your measurements and cut the cabinets. You’ll require to lower the backs and potentially the sides so they suit your designated area.

To wedge them versus the slope, cut the leading back corner of the cabinets at a coordinating angle. Marie does point out that getting this part definitely best isn’t required given that you’re going to cover whatever later on.

3. Install Supports and Cabinets

Screw among the metal assistance rods to the front of the frames and the other along the back at the slope for stabilization. Attach the cabinets to the wall utilizing the brackets.

4. Add Cover Panels

Cut the FÖRBÄTTRA kitchen cover panels to size and fit them over the leading edges as required to produce an integrated appearance. To provide the cabinet a more strong appearance, Marie included a 100cm VOXTORP door to the exposed side. She uses the following heads-up, “This was the fiddliest part of the task, and we needed to develop a design template initially.”

5. Fill, Seal, and Reinforce

If among your systems is for a restroom or comparable space with great deals of wetness, utilize the aluminum profile for support. Marie stated they purchased a fitted profile for the bottom of their restroom cabinets, protecting it into location with silicone. They likewise sealed all of the joints in their restroom system with silicone.

.

. .

If you connected a door to any side, you’ll require to fill the hinge holes and paint them. This is likewise a fun time to prime and paint the whole system if you desire it to be a various color.

6. Add the Drawers and Doors

Install the doors and drawers according to your favored design. Again, can’t worry this sufficient– make certain to double- and triple-check all your measurements and measurements before you buy anything. You wish to make certain the drawers and drawer and door fronts match your cabinet frames, are properly sized, and meshed properly.

7. Light It Up

Use the router to include a groove along the front upper cover panel. Glue the LED strip into the groove to include indirect lighting to your system. It truly includes a great touch.

8. Finish Up With Top Panels

Cut and set up the leading panels. It’s as much as you if you wish to stain them, paint them, and so on Marie oiled the one in the visitor space and used a clear varnish to the one in the restroom.

Overall, Marie stated she’s truly pleased and happy with how whatever ended up, however it takes a great deal of measuring, preparation, and attempting things out. What do you believe? If you choose to provide this one a shot, or you have actually currently dealt with a sloped ceiling of your own, share your hack with us!